diff --git a/setup/postgresql-install.sh b/setup/postgresql-install.sh index 7d1582f4..1468ce34 100644 --- a/setup/postgresql-install.sh +++ b/setup/postgresql-install.sh @@ -82,163 +82,40 @@ msg_ok "Setup PostgreSQL Repository" msg_info "Installing PostgreSQL" apt-get update &>/dev/null -apt-get install -y postgresql-14 &>/dev/null +apt-get install -y postgresql &>/dev/null -cat < /etc/postgresql/14/main/pg_hba.conf +cat < /etc/postgresql/15/main/pg_hba.conf # PostgreSQL Client Authentication Configuration File -# =================================================== -# -# Refer to the "Client Authentication" section in the PostgreSQL -# documentation for a complete description of this file. A short -# synopsis follows. -# -# This file controls: which hosts are allowed to connect, how clients -# are authenticated, which PostgreSQL user names they can use, which -# databases they can access. Records take one of these forms: -# -# local DATABASE USER METHOD [OPTIONS] -# host DATABASE USER ADDRESS METHOD [OPTIONS] -# hostssl DATABASE USER ADDRESS METHOD [OPTIONS] -# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS] -# hostgssenc DATABASE USER ADDRESS METHOD [OPTIONS] -# hostnogssenc DATABASE USER ADDRESS METHOD [OPTIONS] -# -# (The uppercase items must be replaced by actual values.) -# -# The first field is the connection type: "local" is a Unix-domain -# socket, "host" is either a plain or SSL-encrypted TCP/IP socket, -# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a -# non-SSL TCP/IP socket. Similarly, "hostgssenc" uses a -# GSSAPI-encrypted TCP/IP socket, while "hostnogssenc" uses a -# non-GSSAPI socket. -# -# DATABASE can be "all", "sameuser", "samerole", "replication", a -# database name, or a comma-separated list thereof. The "all" -# keyword does not match "replication". Access to replication -# must be enabled in a separate record (see example below). -# -# USER can be "all", a user name, a group name prefixed with "+", or a -# comma-separated list thereof. In both the DATABASE and USER fields -# you can also write a file name prefixed with "@" to include names -# from a separate file. -# -# ADDRESS specifies the set of hosts the record matches. It can be a -# host name, or it is made up of an IP address and a CIDR mask that is -# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that -# specifies the number of significant bits in the mask. A host name -# that starts with a dot (.) matches a suffix of the actual host name. -# Alternatively, you can write an IP address and netmask in separate -# columns to specify the set of hosts. Instead of a CIDR-address, you -# can write "samehost" to match any of the server's own IP addresses, -# or "samenet" to match any address in any subnet that the server is -# directly connected to. -# -# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256", -# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert". -# Note that "password" sends passwords in clear text; "md5" or -# "scram-sha-256" are preferred since they send encrypted passwords. -# -# OPTIONS are a set of options for the authentication in the format -# NAME=VALUE. The available options depend on the different -# authentication methods -- refer to the "Client Authentication" -# section in the documentation for a list of which options are -# available for which authentication methods. -# -# Database and user names containing spaces, commas, quotes and other -# special characters must be quoted. Quoting one of the keywords -# "all", "sameuser", "samerole" or "replication" makes the name lose -# its special character, and just match a database or username with -# that name. -# -# This file is read on server startup and when the server receives a -# SIGHUP signal. If you edit the file on a running system, you have to -# SIGHUP the server for the changes to take effect, run "pg_ctl reload", -# or execute "SELECT pg_reload_conf()". -# -# Put your actual configuration here -# ---------------------------------- -# -# If you want to allow non-local connections, you need to add more -# "host" records. In that case you will also need to make PostgreSQL -# listen on a non-local interface via the listen_addresses -# configuration parameter, or via the -i or -h command line switches. - - - - -# DO NOT DISABLE! -# If you change this first entry you will need to make sure that the -# database superuser can access the database using some other method. -# Noninteractive access to all databases is required during automatic -# maintenance (custom daily cronjobs, replication, and similar tasks). -# -# Database administrative login by Unix domain socket -local all postgres trust +local all postgres peer # TYPE DATABASE USER ADDRESS METHOD - # "local" is for Unix domain socket connections only -local all all trust +local all all peer # IPv4 local connections: host all all 127.0.0.1/32 scram-sha-256 host all all 0.0.0.0/24 md5 # IPv6 local connections: host all all ::1/128 scram-sha-256 host all all 0.0.0.0/0 md5 +# Allow replication connections from localhost, by a user with the +# replication privilege. +local replication all peer +host replication all 127.0.0.1/32 scram-sha-256 +host replication all ::1/128 scram-sha-256 EOF -cat < /etc/postgresql/14/main/postgresql.conf +cat < /etc/postgresql/15/main/postgresql.conf # ----------------------------- # PostgreSQL configuration file # ----------------------------- -# -# This file consists of lines of the form: -# -# name = value -# -# (The "=" is optional.) Whitespace may be used. Comments are introduced with -# "#" anywhere on a line. The complete list of parameter names and allowed -# values can be found in the PostgreSQL documentation. -# -# The commented-out settings shown in this file represent the default values. -# Re-commenting a setting is NOT sufficient to revert it to the default value; -# you need to reload the server. -# -# This file is read on server startup and when the server receives a SIGHUP -# signal. If you edit the file on a running system, you have to SIGHUP the -# server for the changes to take effect, run "pg_ctl reload", or execute -# "SELECT pg_reload_conf()". Some parameters, which are marked below, -# require a server shutdown and restart to take effect. -# -# Any parameter can also be given as a command-line option to the server, e.g., -# "postgres -c log_connections=on". Some parameters can be changed at run time -# with the "SET" SQL command. -# -# Memory units: B = bytes Time units: us = microseconds -# kB = kilobytes ms = milliseconds -# MB = megabytes s = seconds -# GB = gigabytes min = minutes -# TB = terabytes h = hours -# d = days - #------------------------------------------------------------------------------ # FILE LOCATIONS #------------------------------------------------------------------------------ -# The default values of these variables are driven from the -D command-line -# option or PGDATA environment variable, represented here as ConfigDir. - -data_directory = '/var/lib/postgresql/14/main' # use data in another directory - # (change requires restart) -hba_file = '/etc/postgresql/14/main/pg_hba.conf' # host-based authentication file - # (change requires restart) -ident_file = '/etc/postgresql/14/main/pg_ident.conf' # ident configuration file - # (change requires restart) - -# If external_pid_file is not explicitly set, no extra PID file is written. -external_pid_file = '/var/run/postgresql/14-main.pid' # write an extra PID file - # (change requires restart) - +data_directory = '/var/lib/postgresql/15/main' +hba_file = '/etc/postgresql/15/main/pg_hba.conf' +ident_file = '/etc/postgresql/15/main/pg_ident.conf' +external_pid_file = '/var/run/postgresql/15-main.pid' #------------------------------------------------------------------------------ # CONNECTIONS AND AUTHENTICATION @@ -246,726 +123,65 @@ external_pid_file = '/var/run/postgresql/14-main.pid' # write # - Connection Settings - -listen_addresses = '*' # what IP address(es) to listen on; - # comma-separated list of addresses; - # defaults to 'localhost'; use '*' for all - # (change requires restart) -port = 5432 # (change requires restart) -max_connections = 100 # (change requires restart) -#superuser_reserved_connections = 3 # (change requires restart) -unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories - # (change requires restart) -#unix_socket_group = '' # (change requires restart) -#unix_socket_permissions = 0777 # begin with 0 to use octal notation - # (change requires restart) -#bonjour = off # advertise server via Bonjour - # (change requires restart) -#bonjour_name = '' # defaults to the computer name - # (change requires restart) - -# - TCP settings - -# see "man tcp" for details - -#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; - # 0 selects the system default -#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; - # 0 selects the system default -#tcp_keepalives_count = 0 # TCP_KEEPCNT; - # 0 selects the system default -#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; - # 0 selects the system default - -# - Authentication - - -#authentication_timeout = 1min # 1s-600s -#password_encryption = md5 # md5 or scram-sha-256 -#db_user_namespace = off - -# GSSAPI using Kerberos -#krb_caseins_users = off +listen_addresses = '*' +port = 5432 +max_connections = 100 +unix_socket_directories = '/var/run/postgresql' # - SSL - -#ssl = on -#ssl_ca_file = '' -#ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem' -#ssl_crl_file = '' -#ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' -#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers -#ssl_prefer_server_ciphers = on -#ssl_ecdh_curve = 'prime256v1' -#ssl_min_protocol_version = 'TLSv1.2' -#ssl_max_protocol_version = '' -#ssl_dh_params_file = '' -#ssl_passphrase_command = '' -#ssl_passphrase_command_supports_reload = off - +ssl = on +ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem' +ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' #------------------------------------------------------------------------------ # RESOURCE USAGE (except WAL) #------------------------------------------------------------------------------ -# - Memory - - -shared_buffers = 128MB # min 128kB - # (change requires restart) -#huge_pages = try # on, off, or try - # (change requires restart) -#temp_buffers = 8MB # min 800kB -#max_prepared_transactions = 0 # zero disables the feature - # (change requires restart) -# Caution: it is not advisable to set max_prepared_transactions nonzero unless -# you actively intend to use prepared transactions. -#work_mem = 4MB # min 64kB -#hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem -#maintenance_work_mem = 64MB # min 1MB -#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem -#logical_decoding_work_mem = 64MB # min 64kB -#max_stack_depth = 2MB # min 100kB -#shared_memory_type = mmap # the default is the first option - # supported by the operating system: - # mmap - # sysv - # windows - # (change requires restart) -dynamic_shared_memory_type = posix # the default is the first option - # supported by the operating system: - # posix - # sysv - # windows - # mmap - # (change requires restart) - -# - Disk - - -#temp_file_limit = -1 # limits per-process temp file space - # in kilobytes, or -1 for no limit - -# - Kernel Resources - - -#max_files_per_process = 1000 # min 64 - # (change requires restart) - -# - Cost-Based Vacuum Delay - - -#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) -#vacuum_cost_page_hit = 1 # 0-10000 credits -#vacuum_cost_page_miss = 10 # 0-10000 credits -#vacuum_cost_page_dirty = 20 # 0-10000 credits -#vacuum_cost_limit = 200 # 1-10000 credits - -# - Background Writer - - -#bgwriter_delay = 200ms # 10-10000ms between rounds -#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables -#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round -#bgwriter_flush_after = 512kB # measured in pages, 0 disables - -# - Asynchronous Behavior - - -#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching -#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching -#max_worker_processes = 8 # (change requires restart) -#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers -#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers -#parallel_leader_participation = on -#max_parallel_workers = 8 # maximum number of max_worker_processes that - # can be used in parallel operations -#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate - # (change requires restart) -#backend_flush_after = 0 # measured in pages, 0 disables - +shared_buffers = 128MB +dynamic_shared_memory_type = posix #------------------------------------------------------------------------------ # WRITE-AHEAD LOG #------------------------------------------------------------------------------ -# - Settings - - -#wal_level = replica # minimal, replica, or logical - # (change requires restart) -#fsync = on # flush data to disk for crash safety - # (turning this off can cause - # unrecoverable data corruption) -#synchronous_commit = on # synchronization level; - # off, local, remote_write, remote_apply, or on -#wal_sync_method = fsync # the default is the first option - # supported by the operating system: - # open_datasync - # fdatasync (default on Linux and FreeBSD) - # fsync - # fsync_writethrough - # open_sync -#full_page_writes = on # recover from partial page writes -#wal_compression = off # enable compression of full-page writes -#wal_log_hints = off # also do full page writes of non-critical updates - # (change requires restart) -#wal_init_zero = on # zero-fill new WAL files -#wal_recycle = on # recycle WAL files -#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers - # (change requires restart) -#wal_writer_delay = 200ms # 1-10000 milliseconds -#wal_writer_flush_after = 1MB # measured in pages, 0 disables -#wal_skip_threshold = 2MB - -#commit_delay = 0 # range 0-100000, in microseconds -#commit_siblings = 5 # range 1-1000 - -# - Checkpoints - - -#checkpoint_timeout = 5min # range 30s-1d max_wal_size = 1GB min_wal_size = 80MB -#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0 -#checkpoint_flush_after = 256kB # measured in pages, 0 disables -#checkpoint_warning = 30s # 0 disables - -# - Archiving - - -#archive_mode = off # enables archiving; off, on, or always - # (change requires restart) -#archive_command = '' # command to use to archive a logfile segment - # placeholders: %p = path of file to archive - # %f = file name only - # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' -#archive_timeout = 0 # force a logfile segment switch after this - # number of seconds; 0 disables - -# - Archive Recovery - - -# These are only used in recovery mode. - -#restore_command = '' # command to use to restore an archived logfile segment - # placeholders: %p = path of file to restore - # %f = file name only - # e.g. 'cp /mnt/server/archivedir/%f %p' - # (change requires restart) -#archive_cleanup_command = '' # command to execute at every restartpoint -#recovery_end_command = '' # command to execute at completion of recovery - -# - Recovery Target - - -# Set these only when performing a targeted recovery. - -#recovery_target = '' # 'immediate' to end recovery as soon as a - # consistent state is reached - # (change requires restart) -#recovery_target_name = '' # the named restore point to which recovery will proceed - # (change requires restart) -#recovery_target_time = '' # the time stamp up to which recovery will proceed - # (change requires restart) -#recovery_target_xid = '' # the transaction ID up to which recovery will proceed - # (change requires restart) -#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed - # (change requires restart) -#recovery_target_inclusive = on # Specifies whether to stop: - # just after the specified recovery target (on) - # just before the recovery target (off) - # (change requires restart) -#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID - # (change requires restart) -#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' - # (change requires restart) - - -#------------------------------------------------------------------------------ -# REPLICATION -#------------------------------------------------------------------------------ - -# - Sending Servers - - -# Set these on the master and on any standby that will send replication data. - -#max_wal_senders = 10 # max number of walsender processes - # (change requires restart) -#wal_keep_size = 0 # in megabytes; 0 disables -#max_slot_wal_keep_size = -1 # in megabytes; -1 disables -#wal_sender_timeout = 60s # in milliseconds; 0 disables - -#max_replication_slots = 10 # max number of replication slots - # (change requires restart) -#track_commit_timestamp = off # collect timestamp of transaction commit - # (change requires restart) - -# - Master Server - - -# These settings are ignored on a standby server. - -#synchronous_standby_names = '' # standby servers that provide sync rep - # method to choose sync standbys, number of sync standbys, - # and comma-separated list of application_name - # from standby(s); '*' = all -#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed - -# - Standby Servers - - -# These settings are ignored on a master server. - -#primary_conninfo = '' # connection string to sending server -#primary_slot_name = '' # replication slot on sending server -#promote_trigger_file = '' # file name whose presence ends recovery -#hot_standby = on # "off" disallows queries during recovery - # (change requires restart) -#max_standby_archive_delay = 30s # max delay before canceling queries - # when reading WAL from archive; - # -1 allows indefinite delay -#max_standby_streaming_delay = 30s # max delay before canceling queries - # when reading streaming WAL; - # -1 allows indefinite delay -#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name - # is not set -#wal_receiver_status_interval = 10s # send replies at least this often - # 0 disables -#hot_standby_feedback = off # send info from standby to prevent - # query conflicts -#wal_receiver_timeout = 60s # time that receiver waits for - # communication from master - # in milliseconds; 0 disables -#wal_retrieve_retry_interval = 5s # time to wait before retrying to - # retrieve WAL after a failed attempt -#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery - -# - Subscribers - - -# These settings are ignored on a publisher. - -#max_logical_replication_workers = 4 # taken from max_worker_processes - # (change requires restart) -#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers - - -#------------------------------------------------------------------------------ -# QUERY TUNING -#------------------------------------------------------------------------------ - -# - Planner Method Configuration - - -#enable_bitmapscan = on -#enable_hashagg = on -#enable_hashjoin = on -#enable_indexscan = on -#enable_indexonlyscan = on -#enable_material = on -#enable_mergejoin = on -#enable_nestloop = on -#enable_parallel_append = on -#enable_seqscan = on -#enable_sort = on -#enable_incremental_sort = on -#enable_tidscan = on -#enable_partitionwise_join = off -#enable_partitionwise_aggregate = off -#enable_parallel_hash = on -#enable_partition_pruning = on - -# - Planner Cost Constants - - -#seq_page_cost = 1.0 # measured on an arbitrary scale -#random_page_cost = 4.0 # same scale as above -#cpu_tuple_cost = 0.01 # same scale as above -#cpu_index_tuple_cost = 0.005 # same scale as above -#cpu_operator_cost = 0.0025 # same scale as above -#parallel_tuple_cost = 0.1 # same scale as above -#parallel_setup_cost = 1000.0 # same scale as above - -#jit_above_cost = 100000 # perform JIT compilation if available - # and query more expensive than this; - # -1 disables -#jit_inline_above_cost = 500000 # inline small functions if query is - # more expensive than this; -1 disables -#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if - # query is more expensive than this; - # -1 disables - -#min_parallel_table_scan_size = 8MB -#min_parallel_index_scan_size = 512kB -#effective_cache_size = 4GB - -# - Genetic Query Optimizer - - -#geqo = on -#geqo_threshold = 12 -#geqo_effort = 5 # range 1-10 -#geqo_pool_size = 0 # selects default based on effort -#geqo_generations = 0 # selects default based on effort -#geqo_selection_bias = 2.0 # range 1.5-2.0 -#geqo_seed = 0.0 # range 0.0-1.0 - -# - Other Planner Options - - -#default_statistics_target = 100 # range 1-10000 -#constraint_exclusion = partition # on, off, or partition -#cursor_tuple_fraction = 0.1 # range 0.0-1.0 -#from_collapse_limit = 8 -#join_collapse_limit = 8 # 1 disables collapsing of explicit - # JOIN clauses -#force_parallel_mode = off -#jit = on # allow JIT compilation -#plan_cache_mode = auto # auto, force_generic_plan or - # force_custom_plan - #------------------------------------------------------------------------------ # REPORTING AND LOGGING #------------------------------------------------------------------------------ -# - Where to Log - - -#log_destination = 'stderr' # Valid values are combinations of - # stderr, csvlog, syslog, and eventlog, - # depending on platform. csvlog - # requires logging_collector to be on. - -# This is used when logging to stderr: -#logging_collector = off # Enable capturing of stderr and csvlog - # into log files. Required to be on for - # csvlogs. - # (change requires restart) - -# These are only used if logging_collector is on: -#log_directory = 'log' # directory where log files are written, - # can be absolute or relative to PGDATA -#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, - # can include strftime() escapes -#log_file_mode = 0600 # creation mode for log files, - # begin with 0 to use octal notation -#log_truncate_on_rotation = off # If on, an existing log file with the - # same name as the new log file will be - # truncated rather than appended to. - # But such truncation only occurs on - # time-driven rotation, not on restarts - # or size-driven rotation. Default is - # off, meaning append to existing files - # in all cases. -#log_rotation_age = 1d # Automatic rotation of logfiles will - # happen after that time. 0 disables. -#log_rotation_size = 10MB # Automatic rotation of logfiles will - # happen after that much log output. - # 0 disables. - -# These are relevant when logging to syslog: -#syslog_facility = 'LOCAL0' -#syslog_ident = 'postgres' -#syslog_sequence_numbers = on -#syslog_split_messages = on - -# This is only relevant when logging to eventlog (win32): -# (change requires restart) -#event_source = 'PostgreSQL' - -# - When to Log - - -#log_min_messages = warning # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # info - # notice - # warning - # error - # log - # fatal - # panic - -#log_min_error_statement = error # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # info - # notice - # warning - # error - # log - # fatal - # panic (effectively off) - -#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements - # and their durations, > 0 logs only - # statements running at least this number - # of milliseconds - -#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements - # and their durations, > 0 logs only a sample of - # statements running at least this number - # of milliseconds; - # sample fraction is determined by log_statement_sample_rate - -#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding - # log_min_duration_sample to be logged; - # 1.0 logs all such statements, 0.0 never logs - - -#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements - # are logged regardless of their duration; 1.0 logs all - # statements from all transactions, 0.0 never logs - # - What to Log - -#debug_print_parse = off -#debug_print_rewritten = off -#debug_print_plan = off -#debug_pretty_print = on -#log_checkpoints = off -#log_connections = off -#log_disconnections = off -#log_duration = off -#log_error_verbosity = default # terse, default, or verbose messages -#log_hostname = off -log_line_prefix = '%m [%p] %q%u@%d ' # special values: - # %a = application name - # %u = user name - # %d = database name - # %r = remote host and port - # %h = remote host - # %b = backend type - # %p = process ID - # %t = timestamp without milliseconds - # %m = timestamp with milliseconds - # %n = timestamp with milliseconds (as a Unix epoch) - # %i = command tag - # %e = SQL state - # %c = session ID - # %l = session line number - # %s = session start timestamp - # %v = virtual transaction ID - # %x = transaction ID (0 if none) - # %q = stop here in non-session - # processes - # %% = '%' - # e.g. '<%u%%%d> ' -#log_lock_waits = off # log lock waits >= deadlock_timeout -#log_parameter_max_length = -1 # when logging statements, limit logged - # bind-parameter values to N bytes; - # -1 means print in full, 0 disables -#log_parameter_max_length_on_error = 0 # when logging an error, limit logged - # bind-parameter values to N bytes; - # -1 means print in full, 0 disables -#log_statement = 'none' # none, ddl, mod, all -#log_replication_commands = off -#log_temp_files = -1 # log temporary files equal or larger - # than the specified size in kilobytes; - # -1 disables, 0 logs all temp files +log_line_prefix = '%m [%p] %q%u@%d ' log_timezone = 'Etc/UTC' #------------------------------------------------------------------------------ # PROCESS TITLE #------------------------------------------------------------------------------ -cluster_name = '14/main' # added to process titles if nonempty - # (change requires restart) -#update_process_title = on - - -#------------------------------------------------------------------------------ -# STATISTICS -#------------------------------------------------------------------------------ - -# - Query and Index Statistics Collector - - -#track_activities = on -#track_counts = on -#track_io_timing = off -#track_functions = none # none, pl, all -#track_activity_query_size = 1024 # (change requires restart) -stats_temp_directory = '/var/run/postgresql/14-main.pg_stat_tmp' - - -# - Monitoring - - -#log_parser_stats = off -#log_planner_stats = off -#log_executor_stats = off -#log_statement_stats = off - - -#------------------------------------------------------------------------------ -# AUTOVACUUM -#------------------------------------------------------------------------------ - -#autovacuum = on # Enable autovacuum subprocess? 'on' - # requires track_counts to also be on. -#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and - # their durations, > 0 logs only - # actions running at least this number - # of milliseconds. -#autovacuum_max_workers = 3 # max number of autovacuum subprocesses - # (change requires restart) -#autovacuum_naptime = 1min # time between autovacuum runs -#autovacuum_vacuum_threshold = 50 # min number of row updates before - # vacuum -#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts - # before vacuum; -1 disables insert - # vacuums -#autovacuum_analyze_threshold = 50 # min number of row updates before - # analyze -#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum -#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table - # size before insert vacuum -#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze -#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum - # (change requires restart) -#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age - # before forced vacuum - # (change requires restart) -#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for - # autovacuum, in milliseconds; - # -1 means use vacuum_cost_delay -#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for - # autovacuum, -1 means use - # vacuum_cost_limit - +cluster_name = '15/main' #------------------------------------------------------------------------------ # CLIENT CONNECTION DEFAULTS #------------------------------------------------------------------------------ -# - Statement Behavior - - -#client_min_messages = notice # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # log - # notice - # warning - # error -#row_security = on -#default_tablespace = '' # a tablespace name, '' uses the default -#temp_tablespaces = '' # a list of tablespace names, '' uses - # only default tablespace -#default_table_access_method = 'heap' -#check_function_bodies = on -#default_transaction_isolation = 'read committed' -#default_transaction_read_only = off -#default_transaction_deferrable = off -#session_replication_role = 'origin' -#statement_timeout = 0 # in milliseconds, 0 is disabled -#lock_timeout = 0 # in milliseconds, 0 is disabled -#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled -#vacuum_freeze_min_age = 50000000 -#vacuum_freeze_table_age = 150000000 -#vacuum_multixact_freeze_min_age = 5000000 -#vacuum_multixact_freeze_table_age = 150000000 -#vacuum_cleanup_index_scale_factor = 0.1 # fraction of total number of tuples - # before index cleanup, 0 always performs - # index cleanup -#bytea_output = 'hex' # hex, escape -#xmlbinary = 'base64' -#xmloption = 'content' -#gin_fuzzy_search_limit = 0 -#gin_pending_list_limit = 4MB - # - Locale and Formatting - datestyle = 'iso, mdy' -#intervalstyle = 'postgres' timezone = 'Etc/UTC' -#timezone_abbreviations = 'Default' # Select the set of available time zone - # abbreviations. Currently, there are - # Default - # Australia (historical usage) - # India - # You can create your own file in - # share/timezonesets/. -#extra_float_digits = 1 # min -15, max 3; any value >0 actually - # selects precise output mode -#client_encoding = sql_ascii # actually, defaults to database - # encoding - -# These settings are initialized by initdb, but they can be changed. -lc_messages = 'C' # locale for system error message - # strings -lc_monetary = 'C' # locale for monetary formatting -lc_numeric = 'C' # locale for number formatting -lc_time = 'C' # locale for time formatting - -# default configuration for text search +lc_messages = 'C' +lc_monetary = 'C' +lc_numeric = 'C' +lc_time = 'C' default_text_search_config = 'pg_catalog.english' -# - Shared Library Preloading - - -#shared_preload_libraries = '' # (change requires restart) -#local_preload_libraries = '' -#session_preload_libraries = '' -#jit_provider = 'llvmjit' # JIT library to use - -# - Other Defaults - - -#extension_destdir = '' # prepend path when loading extensions - # and shared objects (added by Debian) - - -#------------------------------------------------------------------------------ -# LOCK MANAGEMENT -#------------------------------------------------------------------------------ - -#deadlock_timeout = 1s -#max_locks_per_transaction = 64 # min 10 - # (change requires restart) -#max_pred_locks_per_transaction = 64 # min 10 - # (change requires restart) -#max_pred_locks_per_relation = -2 # negative values mean - # (max_pred_locks_per_transaction - # / -max_pred_locks_per_relation) - 1 -#max_pred_locks_per_page = 2 # min 0 - - -#------------------------------------------------------------------------------ -# VERSION AND PLATFORM COMPATIBILITY -#------------------------------------------------------------------------------ - -# - Previous PostgreSQL Versions - - -#array_nulls = on -#backslash_quote = safe_encoding # on, off, or safe_encoding -#escape_string_warning = on -#lo_compat_privileges = off -#operator_precedence_warning = off -#quote_all_identifiers = off -#standard_conforming_strings = on -#synchronize_seqscans = on - -# - Other Platforms and Clients - - -#transform_null_equals = off - - -#------------------------------------------------------------------------------ -# ERROR HANDLING -#------------------------------------------------------------------------------ - -#exit_on_error = off # terminate session on any error? -#restart_after_crash = on # reinitialize after backend crash? -#data_sync_retry = off # retry or panic on failure to fsync - # data? - # (change requires restart) - - #------------------------------------------------------------------------------ # CONFIG FILE INCLUDES #------------------------------------------------------------------------------ -# These options allow settings to be loaded from files other than the -# default postgresql.conf. Note that these are directives, not variable -# assignments, so they can usefully be given more than once. - -include_dir = 'conf.d' # include files ending in '.conf' from - # a directory, e.g., 'conf.d' -#include_if_exists = '...' # include file only if it exists -#include = '...' # include file - - -#------------------------------------------------------------------------------ -# CUSTOMIZED OPTIONS -#------------------------------------------------------------------------------ - -# Add settings for extensions here +include_dir = 'conf.d' EOF sudo systemctl restart postgresql